- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
The smallest insulation testers available on the market today. With options of one, two and three voltage test voltage instruments, the MIT230HD instruments offer a range of safety and operation features. The display offers a combination of digital readout and analog display, using Megger's patented DART display technology. Built to withstand the rigors of hard use, and small enough to drop into your pocket when not in use.
The smallest insulation testers available on the market today. With options of one, two and three voltage test voltage instruments, the MIT230HD instruments offer a range of safety and operation features. The display offers a combination of digital readout and analog display, using Megger's patented DART display technology. Built to withstand the rigors of hard use, and small enough to drop into your pocket when not in use.
Features
Continuity Testing
Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. There is no need to press compliance with international requirements. There is no need to press the test button. All instruments will measure up to 100 ½ on continuity, of which 0-10 ½ is performed at greater than 200 mA to meet international electrical testing requirements. Lead null is possible up to 9.99 ½ of test lead resistance, ensuring the ability to null fused test leads as well as standard leads.
Continuity Buzzer
Provides a means of rapid cable testing and circuit identification, with voltage protection should you accidentally touch a live circuit. The buzzer operated at 2 ½ threshold.
Safety
Every Megger instrument is designed with safety as its primary objective. All instruments meet or exceed the requirements of safety directive IEC 61010 and EN61557 for insulation and continuity testing.
Default Fault Meter
A built-in voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25 V.
Insulation Test Inhibit
Circuits in excess of 25 V will generate a voltage warning. Circuits over 50 V will inhibit testing of insulation, protecting the operator and the instrument from injury or damage.
| Nominal test voltage | 250, 500 and 1000 VDC |
| Measuring Range | 10 k½ - 1000 M½ on all ranges |
| Terminal voltage on open circuit | -0% +25% of rated voltage |
| Short circuit current | 205 mA +10 mA –5 mA |
| Test current on load | >1 mA at minimum pass values of insulation as specified inBS7671, HD384, IEC364 and VDE0413 part 1 |
| Accuracy (at 20° C) | ±3% of reading ±2 digits up to 10 M½, ±5% of reading ±2 digits up to 100 M½, ±30% of reading up to 1000 M½ |
| Zero offset adjust | 0 to 9,99 ½ |
| Continuity buzzer | Operates at <2 ½ |
| Operating temperature range | -10 to +55°C (14 to 130°F) |
| Environmental protection | IP40 |
| Dimensions | 195 x 98 x 40mm (7.7 x 3.9 x 1.6 inches |
| Weight | 1.2 lbs |
Click on a category to view a selection of compatible accessories with the Megger MIT230HD0 Insulation Tester with Rubber Boot, 250V/500V/1000V.
| Nominal test voltage | 250, 500 and 1000 VDC |
| Measuring Range | 10 k½ - 1000 M½ on all ranges |
| Terminal voltage on open circuit | -0% +25% of rated voltage |
| Short circuit current | 205 mA +10 mA –5 mA |
| Test current on load | >1 mA at minimum pass values of insulation as specified inBS7671, HD384, IEC364 and VDE0413 part 1 |
| Accuracy (at 20° C) | ±3% of reading ±2 digits up to 10 M½, ±5% of reading ±2 digits up to 100 M½, ±30% of reading up to 1000 M½ |
| Zero offset adjust | 0 to 9,99 ½ |
| Continuity buzzer | Operates at <2 ½ |
| Operating temperature range | -10 to +55°C (14 to 130°F) |
| Environmental protection | IP40 |
| Dimensions | 195 x 98 x 40mm (7.7 x 3.9 x 1.6 inches |
| Weight | 1.2 lbs |
Click on a category to view a selection of compatible accessories with the Megger MIT230HD0 Insulation Tester with Rubber Boot, 250V/500V/1000V.
