The ideal probe for highly accurate measurements in the remaining humidity range (e.g. in adsorption dryers to -50°C TPD). Includes a certificate with test point.
The ideal probe for highly accurate measurements in the remaining humidity range (e.g. in adsorption dryers to -50°C TPD). Includes a certificate with test point.
The TPD (Pressure Dew Point) is the temperature at which compressed air reaches the saturation state (100% RH). This value is an important criteria for the perfect running of the compressed air plant.
This probe is connected to a compressed air system via a standard plug-in connector (G1/4" internal thread to ISO 228-1) or via a screw-on adapter for measurements at test points. If you require other standard plug-in connectors with the G 1/4" thread, it can be screwed into the measuring chamber.
The sensor is positioned in the flow of compressed air being measured, for the duration of the measurement. The probes can be used, without a measuring chamber, in accordance with the Instruction Manual for the Testo x35 instruments. By connecting the probe to Testo x35 the user has a portable, mains independent measuring system. The large display enables the display of the relative humidity or the dew point with the temperature.
Measuring Range | 0 to 100 %RH, -60 to 50°C TPD |
Pressure Dew Point TPD | -60 to 50°C TPD |
Pressure Range | Overpressure to 15 bar |
Temperature Accuracy | ±0.4°C |
Resolution | 0.1% RH / 0.1°C |
Temperature Range | Probe: -20 to 50°C Instrument: 0 to 40°C |
Control Point | 11.3 to 75.3% RH |
Measuring Range | 0 to 100 %RH, -60 to 50°C TPD |
Pressure Dew Point TPD | -60 to 50°C TPD |
Pressure Range | Overpressure to 15 bar |
Temperature Accuracy | ±0.4°C |
Resolution | 0.1% RH / 0.1°C |
Temperature Range | Probe: -20 to 50°C Instrument: 0 to 40°C |
Control Point | 11.3 to 75.3% RH |